Cramer RM2700 Manual Del Operario página 8

Troubleshooting
This section also presents some symptoms that can guide you if the mower does not work as expected.
Indicator LEDs on Mower
LED Status
1. Operating Flashing
(Green)
On
Off
2. Connectivity Flashing
(Blue)
On
Off
3. Security Flashing
(Yellow)
Off
4. Error Flashing
(Red)
Breaks in Boundary Wire and Guide Wire
Breaks in the boundary wire and guide wire (if installed) are usually the result of unintentional physical damage.
Inspect the entire boundary wire from the charging station and back.
Inspect the guide wire (if installed) from the charging station to the splice into the boundary wire.
Inspect that all the couplings have been properly squeezed to make connections.
Meaning
Recovery mode
Mower in operation mode (charging, parked in Charging
station, paused, mowing or searching)
Mower stopped with Stop button on mower, safety key in
Disabled position, mower in error state or mower waiting for
PIN code.
Trying to connect to internet server
Connected to internet server
Mower not in "Power on mode"
PIN code authorization required
No pin required
Mower stopped with error
Action
Place the robot in charging station for up to 5
hours and wait for the green LED to stop flash.
If LED doesn't stop flash then restart the robot
outside the CS and try again.
... via Mobile App.
No action required
Check the reason for the error and then restart
by pressing the Start button on the mower.
CRAMERTOOLS.COM
Version 3 - 2022.08.30
EN
7