3.3 Electrical connection
• Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power
supply.
• The appliance must be earthed. The
power supply cable plug is provided with a
contact for this purpose. If the domestic
power supply socket is not earthed,
connect the appliance to a separate earth
in compliance with current regulations,
consulting a qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
3.4 Levelling
Door alignment depends on proper
levelling.
It is advisable to empty the appliance before
carrying out this operation.
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
4. OPERATION
8
ENGLISH
3.5 Rear spacers
Please refer to the separate document
with instructions on installation and door
reversal.
CAUTION!
If you position the appliance against the
wall in a freestanding installation, install
the rear spacers in order to guarantee
the minimum distance required for air
circulation. Use the provided rear
spacers as indicated in the Installation
Instruction.
3.6 Door reversibility
Please refer to the separate document with
instructions on installation and door reversal.
CAUTION!
At every stage of reversing the door
protect the floor from scratching with a
durable material.