LaserLiner LaserCube Manual De Instrucciones página 6

Completely read through the operating instructions,
the „Warranty and Additional Information" booklet as
!
well as the latest information under the internet link
at the end of these instructions. Follow the instructions
they contain.These documents must be kept in a safe
place and passed on together with the product.
Intended use
This line laser is suitable for alignment work on the floor and
on the wall. The device can be aligned using vertical and
horizontal vials and can also be used as a laser spirit level. The
special pins allow fastening to fine plaster, wallpaper, wood
and veneered surfaces.
General safety instructions
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted, this
will otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.
Safety instructions
Using class 2 lasers
IEC 60825-1:2014, EN 60825-1:2014/A11:2021
EN 50689-1:2021
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation,
they should shut their eyes and immediately move away
from the beam.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars) be used
to look at the laser beam or reflections.
06
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm