LaserLiner LaserCube Manual De Instrucciones página 7

– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst
laser devices are in operation.
– In public areas shield off the laser beam with barriers and
partitions wherever possible and identify the laser area with
warning signs.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limits in accordance with
the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals,
aircraft, petrol stations or in the vicinity of people with
pacemakers – may apply. Electronic devices can potentially
cause hazards or interference or be subject to hazards or
interference.
1
2
1
Inserting and removing the batteries
Open the battery compartment
on the rear of the housing and
insert 3 x 1,5V LR44 (AG13).
Correct polarity must be
observed. Replace the battery
compartment cover. The device
can now be switched on. The
device must be switched off
before removing the batteries.
4
3
LaserCube
1 Laser output windows
2 Battery compartment
(bottom)
3
ON / OFF switch
4
Vials
–
07
EN