Haier HCMOSOE Manual De Usuario página 6

_pecki_g Yoo_ Free_e_ °
1. Remove aJJpackaging material This incJudes the foam base and aJJ
adhesive tape balding the freezer accessories inside and
outside_
2. Inspect and remove any remains of packing, tape or printed
materiaJs before powering on the freezen
Adiusti g Yeur Freezer
®Your freezer is designed for freestandinginstaJJation o nJy.
Ht s houJdnot be recessed or buiJt-in.
PJace the freezer on a floor strong enough to support it fuJJy Joaded.
®When moving the freezer,nevertiJtit more than a 45-degree angJe.
Thiscould damage the compressorand the sealedsystem.
ff the freezer is tiJtedJetit stand in an upright position for at [east24
hours prior to pJugging.Thisis to a[[o,uthe refrigerant to serf[e.
Proper Air Cir¢o etio
To assure your freezer works at the maximum efficiency it
was designed for, you shouJd instaJJit in a Jocation where there
is proper air circuJation, pJumbing and eJectricaJ connections_
The foJlowing are recommended clearances around the refrigerator:
Sides ............... 4" (102mm}
Top.................... 4" ('[02mm}
Back.................. 4 _ ( ] 02ram)