Publicidad
Idiomas disponibles
Idiomas disponibles
Step 5
Stand the cabinet upright. Add the frame to the cabinet box as show in the illustration. Using
a Phillips Head screwdriver, rotate the connector clockwise to fasten into place. Ensure all
connectors are locked into place before moving the cabinet.
Step 6
Using a Phillips Head screwdriver, secure the back panel with 5/8" CSK screws as shown in the
illustration. Be careful not to over-tighten as this may damage the product.
Note: For DB30 cabinet, three 5/8" CSK screws are required.
D
5/8"
CSK SCREW
x2
Need assistance? Contact us at 1.833.748.4846.
5
Publicidad
