Publicidad
Step 4. Replace the pole clamp
(14) and at the same time raise
the chrome adjustable pole (13)
then tighten the clamp (14).
Attach the fan assembly on top
of the pole and tighten the pole
retaining screw (12).
Note: the adjustable pole (13)
can sometimes slip inside the
lower base pole (15) during
transit.
FIG 4
Guard
locating pins
Step 5. Note the Rear
Guard locating pins on the
Motor Housing (7).
FIG 5
Step 6. Place the rear
guard (5) over the pins on
the motor housing (7) and
replace the Rear Guard
Central Fixing (4) nut by
screwing it back clockwise.
Note: the carry handle is at
the top:
FIG 6
ENGLISH
Publicidad
