Publicidad
Idiomas disponibles
Idiomas disponibles
•
Warning: MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC and needs
to be installed and put into service according to the EMC information provided in the accompanying
documents.
•
Warning: Connectors should not be touched, and connections should not be made to these connectors
unless ESD precautionary procedures are used.
•
Warning: ESD protection mark
•
Warning: Portable and mobile RF communications equipment can affect medical electrical equipment.
•
Warning: The use of accessories and cables other than those supplied with the instrument, except for
cables sold by the manufacturer of the equipment as replacement parts, may result in increased emission
or decreased immunity of the equipment or system.
•
Warning: The emissions characteristics of this equipment make it suitable for use in industrial areas
and hospitals (CISPR 11 class A). If it is used in a residential environment (for which CISPR 11 class B is
normally required) this equipment might not offer adequate protection to radio-frequency communica-
tion services.
FCC Compliance Statement
QuickSee Free medical devices comply with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference and (2) this device must accept any inter-
ference received, including interference that may cause undesired operation.
Technical specifications
Autorefractor
Pupil size
Intended patient population
Accommodation control
Cycloplegia requirement
Dilation Requirement
Illumination requirements
Acquisition time
Spherical Range
Cylindrical Range
Axial range
Base Technology
Keratometer (QuickSee Free Pro Keratometry only)
Radius of curvature
Corneal astigmatism
Center
12
may be used in lieu of protective covers.
2 to 8 mm
>= 3 years
Open view, Fogging lens (optional)
None
None
None
5, 10 seconds
-13D to +10D, increments of 0.01D, 0.125D, 0.25D
-8D to +8D, increments of 0.01D, 0.125D, 0.25D
0–180º, increments of 1º, 5º, 10º
Wavefront aberrometry
5 to 12 mm in 0.01 mm increments
0 D to +/- 8 D (R 5 to 12mm)
Diameter 3.2 mm at Radius of curvature 8 mm
Publicidad
