AROHA SM03 Manual De Instrucciones página 4

EN
Aroha Safety Pro Mini Smoke Detector manual
Please read the manual carefully to ensure safe, proper
use and store it in a safe place for future reference. Scan
the QR-code or visit
by-step instructions with video to safely install your
detector and consult the FAQ.
A. Activate/Deactivate the detector
The device is deactivated by default before leaving our factory. Twist the
mounting bracket counterclockwise off the detector by aligning the lines
(Figure 1).
Power on: Set the switch on the back
of the detector to "ON" using the
supplied stick (Figure 2).
Power off: Set the switch on the back
of the detector to "OFF" using the
supplied stick (Figure 2).
CAUTION
The installation instructions must
be followed strictly to avoid unsafe
conditions.
Do not paint your detector.
The battery cannot be replaced;
do not try to replace the battery as
this will
unuseable and can cause a fire
due to the high-capacity lithium
battery.
03
www.aroha.nl/manual
render the detector
for the step-
Figure 1: Align the lines
Figure 2: Switch