AROHA SM03 Manual De Instrucciones página 7

Mounting instructions
Step 1: Twist the mounting bracket counterclockwise off the detector.
Step 2: Put the bracket on the mounting position and mark the 2 screw
holes.
Step 3: Drill two 5mm mounting holes and insert the two plastic anchor
plugs by hammer.
Step 4: Screw the mounting bracket to the ceiling or the wall.
Step 5: Attach the detector to the mounting bracket and turn clockwise to
lock the detector.
Figure 4 & 5: Recommended mounting locations
F. Maintenance and cleaning
There are a few steps you need do to keep it working properly:
Test the detector at least once a month.
Do not paint the detector. Paint will seal the vents and interfere with the
sensor's ability to detect smoke.
Never attempt to disassemble the detector to clean inside. This will
damage the detector and possibly render it unuseable.
EN
06