Lindy 38346 Manual De Usuario página 27

Manuel Utilisateur
r status Statut système
s tx input x Set entrée video TX
x = USBC, HDMI,
AVMUTE, OFF
r tx input Get port d'entrée port TX
s tx autoswitch x Set TX auto-switching
on/off
x = ON, OFF
r tx autoswitch Get TX auto-switching
status
s tx autoswitch Set TX auto-switching
mode x mode
x = 0: 5V detection
1: signal detection
r tx autoswitch Get TX auto-switching
mode mode status
s rx downscale Set RX downscaling mode,
x x= AUTO: adaptation
automatique par rapport à
l'écran.
ON: force 4K vers 1080p.
OFF: bypass vidéo.
r rx downscale Get RX downscaling mode
s tx audio mute x Set TX de-embedding
audio mute on/off
x = ON, OFF
r tx audio mute Get TX de-embedding
audio mute status
s rx audio mute Set RX de-embedding
x audio mute on/off
x = ON, OFF
r rx audio mute Get RX de-embedding
audio mute status
r status
s tx input
USBC
r tx input
s tx autoswitch
ON
r tx autoswitch
s tx autoswitch
mode 1
r tx autoswitch
mode
s rx downscale
AUTO
r rx downscale
s tx audio mute
ON
r tx audio mute
s rx audio mute
ON
r rx audio mute
next prompt to confirm
Input: USB-C
Video: 1920x1080p60
Audio: 48K PCM 2CH
HDCP: 1.4
USB Host: Connected
HDBT Link: ON
HDBT Signal: ON
EDID: DIP_00 (Copy
display's EDID)
Set tx input from USBC
(default USBC)
USBC
Set tx autoswitch ON
(default ON)
ON
Set tx autoswitch mode 1: signal
detection (default 1: signal
detection)
TMDS
Set rx downscale AUTO
(default AUTO)
AUTO
Set tx audio mute ON
(default OFF)
OFF
Set rx audio mute ON
(default OFF)
OFF
Français