MoMi FLEET Manual De Usuario página 6

to the user or third parties.
• The product is intended for children over 3 years of age.
• Not suitable for children under 3 years old since the child at that age is not strong enough.
• This toy has no brake.
• The bike is to be used only on flat and dry surfaces without any obstacles. Do not use on climbs and
slopes, around traffic, on wet or gravel surfaces.
• Do not use around any body of water (rivers, pools, etc.) and other obstacles.
• The product has to be used under adult supervision.
• The product has to be assembled by an adult. Keep all the parts of the product away from children
while assembling the product. Keep the manual for future reference.
• A child should be instructed on how to use the product properly. Please make sure that the child is
physically capable of controlling the bike and knows how to slow down and stop.
• The bike should be checked and maintained regularly. Before each use make sure that the bike is
intact and that there are no loose parts or missing elements.
• Before using make sure that all bolts are securely tightened and that all components are securely
installed.
• If any elements are missing or broken do not use the bike. Only use original parts for the bicycle.
• Do not use it in the dark and in bad weather. Do not use the bike around stairs and steps.
• Do not drag the bike around from a bumper of a car or other vehicle.
• The bike is fit for one person. The bike can be only used by one person at a time.
• It is crucial to make sure that while riding the bike child do not take their hands off the handles.
Riding a bike with no handlebars can cause serious injuries for the child.
• The maximum capacity of the bike is 25 kg.
COMPONENTS:
A. Handlebar
B. Fork with wheel
C. Saddle
D. Frame with wheel
PRODUCT ASSEMBLY:
1. Install washers a and b on the frame. Press the washers inside the steel hole at the top and bottom
of the frame (fig. 1).
2. Put the fork in the frame (fig. 2).
3. Put the clamp c, the plastic cap F and the handle bar A on the fork, then tighten the clamp c (fig. 3).
Make sure that the handlebar does not move in the clamp. For safety, always check all screws in the
balance bike.
4. Put the cap F on the rod of the seat C. Install the seat C into the frame of the balance bike to a
height appropriate for your child and tighten the saddle clamp c (fig. 4)
PRODUCT MAINTENANCE:
• The condition of the bicycle should be checked regularly.
6
E. Set of washers and allen key:
- Washer a and b
- Clamp c x2
- Allen key for adjustment
F. Cap x2
EN