Publicidad
Idiomas disponibles
Idiomas disponibles
5
LUBRICATION AND MAINTENANCE
LUBRICATION.
5.4
MACHINE: Lubricate the following
points.Weekly or every 40 working hours.
1. Lubricate the following with Shell Darina R2
grease.
(a)
Lift arm pivots (A).
(b)
Cutting unit pivots (B).
(c)
Axle centre pivot (C).
(d)
Axle stub shaft pivot (D)
(e)
Steering ram rod end (E)
(f)
Steering linkage rod ends (F)
(g)
Cutting cylinder bearings and roll bearings.
(Where lube points are fitted)
(h)
Rear wheel bearings (2WD Only)
(i)
Steering ram mount (G)
(j)
Spanner Height of Cut Adjusters (Where
fitted)
2 . Lubricate the following with engine oil:
Divertor Valve spools.
RANSOMES PARKWAY 2250 PLUS
MAINTENANCE MANUAL
GB-13
Publicidad
