Maintenance
Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle.
Drum clean+
Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats the water
between 60 °C and 70 °C, and it also removes accumulated dirt from the rubber door gasket.
1. Tap
.
2. Turn the Navigation dial to select Drum Clean+.
3. Tap and hold
.
CAUTION
• Do not use any cleaning agents for cleaning the drum. Chemical residue in the drum may cause damage
to the laundry or the drum of the washing machine.
• To prevent limescale, add the proper amount of detergent according to your local water hardness or add
a water softener additive together with the detergent.
DRUM CLEAN+ reminder
Depending on the model, the Drum Clean+ reminder is either an icon or an LED.
For icons, the icon lights up on the control panel.
For LEDs, the LED lights up next to Drum Clean+, or on the option area of the control panel.
• The Drum Clean+ reminder blinks on the control panel once every 40 washes. It is advisable to perform
Drum Clean+ regularly.
• When you first see this reminder blinking, you can ignore the reminder for 6 consecutive washes. From
the 7
wash, the reminder no longer appears. However, it appears again on the second 40
th
• Even after the last process is terminated, the "0" message may remain.
• You can record the running count of the Drum Clean+ cycle by pressing the Power button. This does not
stop or turn off the machine but marks your cycle count.
• Even if "0" does not disappear, the machine operates normally.
• It is recommended to run the cycle regularly for hygienic purposes.
50
English
U-PJT_WASHER-MD_SimpleUX_DC68-04322L-00_EN.indd 50
U-PJT_WASHER-MD_SimpleUX_DC68-04322L-00_EN.indd 50
wash.
th
2024/1/2 11:48:24
2024/1/2 11:48:24