Publicidad
Idiomas disponibles
Idiomas disponibles
CHAPTER -3: USING YOUR FRIDGE FREEZER
Economy mode
How would it be used?
• Push "mode button" until the eco symbol appears.
• If no button is pressed for 1 second. The mode will be set. The eco symbol will blink 3 times.
When the mode is set, the buzzer will beep twice.
• The freezer and refrigerator temperature segments will display "E".
• The economy symbol and E will light till mode finishes.
In this mode:
• The freezer may be adjusted. When economy mode is cancelled, the selected setting values
will commence.
• Cooler may be adjusted. When economy mode is cancelled, the selected setting values will
commence.
• Super cool and super freeze modes can be selected. Economy mode is automatically cancelled
and the selected mode is activated.
• Holiday mode can be selected after cancelling the economy mode. Then the selected mode is
activated.
• To cancel, you will just need to press the mode button.
Holiday mode
How would it be used?
• Push the "mode button" until the holiday symbol appears
• If no button is pressed for 1 second. Mode will be set. The holiday symbol will blink 3 times. When
the mode is set, the buzzer will beep twice.
• Cooler temperature segment will display "--".
• Holiday symbol and "--" will light till mode finishes.
In this mode:
• The freezer may be adjusted. When holiday mode is cancelled, the selected setting values will
commence.
• Cooler may be adjusted. When holiday mode is cancelled, the selected setting values will
commence.
• Super cool and super freeze modes can be selected. Holiday mode is automatically cancelled
and the selected mode is activated.
• Economy mode can be selected after cancelling the holiday mode. Then the selected mode is
activated.
• To cancel, you will just need to press the mode button.
Drink cool mode
When would it be used?
This mode is used to cool the drinks within an adjustable time.
How would it be used?
• Press the freezer button for 3 seconds.
• Special animation will begin on the set freezer value screen and 05 will blink on set cooler value
screen.
• Press cooler button to adjust the time (05 - 10 - 15 - 20 - 25 - 30 minutes).
• When you select the time, the numbers will blink 3 times on screen and beep twice.
• If no button is pressed within 2 seconds, the time will be set.
• The countdown begins from the adjusted time minute by minute.
• The remaining time will blink on the screen.
• To cancel this mode press the freezer set button for 3 seconds.
EN -7-
Publicidad
