Power Supply; Rating Plate; Setting Up The Device; Selection Of The Weight And Size Units - CASO DESIGN BS 1 Manual Del Usuario

4.6 Power supply

To replace the batteries, take out one in the middle from the negative pole
to the others. Please note that the incorrect polarity will cause the
permanent damage to the electronic parts.

5 Rating plate

The rating plate with the performance data can be founded on the back of
the device
6 Operation
This chapter provides important information on operating the device.
Follow the instructions in order to avoid danger and damage.

6.1 Setting up the device

Please place the scale on flat and solid ground. Place it always on the
same place to avoid any difference in measuring due to change of
underground.

6.2 Selection of the weight and size units

Open the battery box cover and press the small button to interchange the
unit between kg and lb.
6.3 Switch on
Step on the scale and the display lights up.
6.4 Switch off
The scale switches off automatically after about 8 seconds.
caso Personenwaage BS 1
Turn around the scales; battery compartment is
on the back of the scales.
Insert the batteries
Pull the battery cover in the arrow direction
Install 4 x 1.5 AA batteries as shown.
After installing the batteries, put back the
battery cover and push the cover back.
Please note
► Before weighing, select the weight unit. During use, it is
not possible to change between the units.
7