The microphone is
detected but no output of
the sound after updating
Windows 10
SAFETY INSTRUCTIONS
Read carefully and follow all instructions before using this
product.
1. Do not expose the device to excessive moisture, water or
dust. Do not install in rooms with high humidity and dust level.
2. Do not expose the device to heat: do not place it close to heating
appliances, and do not expose it to direct sun rays.
3. Clean the device with dry cloth only.
WARNING
It is forbidden to dismantle the device. Attempt to repair this device is not
recommended and leads to warranty waste.
WARRANTY
The warranty period starts from the day of the product purchase from Lorgar
authorized Seller. The date of purchase is the date specified on your sales
receipt or on the waybill. During the warranty period, repair, replacement
or refund for the purchase shall be performed at the discretion of Lorgar. In
order to obtain warranty service, the goods must be returned to the Seller
at the place of purchase together with proof of purchase (receipt or bill of
lading). 2 years warranty from the date of purchase by the consumer. The
service life is 2 years. Additional information about the use and warranty is
available at https://lorgar.eu/warranty-terms/
Manufacturer: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond
Court 4103 Ayios Athanasios
To let apps access the
microphone, please select
Settings>Privacy>Microphone, then
turn on Allow apps to access your
microphone.