Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Assembly
Mounting the Slicing blade/
Grating blade
1. Position Driver on motor
base.
2. Position processing bowl
into the Driver and turn
clockwise to seat firmly on
motor base.
3. Install desired blade onto
the blade holder.
4. Place blade holder onto the
Driver.
5. Place cover on bowl.
6. Turn cover clockwise until
cover interlocks on bowl.
7. Put food into the feeding
chute.
8. Use pusher to push food
down for processing.
Tips:
•
Choose desired blade
according to food type and
your desired food shape to
achieve.
•
Push softly when feeding
food.
•
Pre-cutting food into smaller
pieces according to the
diameter of feeding tube.
•
Feed gradually for better
effect. When cutting soft
food, choose lower speed
to avoid the food turning
soupy. If large quantity food
needs to process, cut it for
several batches. 1200ml for
one batch.
6
CJ107_ML_A5_v2_20240314.indb 6
Mounting the Citrus juicer
attachment
Tips:
•
Install the citrus juicer
attachment as shown
above.
•
For citrus juicer function,
please choose low speed
setting "1".
•
For use, cut citrus fruit
in half and place on
the stainer cone. Then
press the fruit half gently
against the stainer cone to
squeeze juice.
Mounting the Blender jar
1. Make sure the blade base is fixed
tightly to the jar bottom.
2. Put food into the jar.
3. Install jar lid and lid plug properly.
4. Put blender jar onto motor base
vertically, then rotate jar clockwise
to secure it in place.
Tips:
•
Choose PULSE function for pre-
mixing is recommended before
operation.
•
1800ML for one batch.
•
Lid jug can be used to measure or
add ingredients during operation.
2024/3/14 18:28:18
Publicidad
