Publicidad
• Do not overload the stroller! Any load placed and / or attached to the handle, board, backrest, canopy and /
or sides of the stroller can affect its stability! The stroller and the seat are designed to carry only one child!
• Do not use spare parts and other components not supplied by the manufacturer! The manufacturer accepts
no liability for safety if used spare parts, different from the original ones or approved by the approved type.
• Do not make changes or modifications to the construction! If necessary, contact your supplier or an
authorized service centre for advice and repair.
• The car seat does not replace the baby seat or crib. When the baby does not need sleep, it should be placed
in a suitable baby stroller, seat or crib.
• Do not use the product if you find any missing or damaged parts!
• Do not allow children under 3 years of age to fully assemble the product to avoid access to small and
disassembled parts!
• Do not place additional cords or ties on the product to avoid the risk of suffocation!
• Do not use the stroller on escalator and be careful when getting down or up on the sidewalk.
• Keep the plastic packaging away from children to avoid the risk of suffocation!
• DO NOT store the product in humid places and in direct sunlight!
SEE FIGURE PD:
PD: 1. Angle adjuster; 2.One hand fold button; 3. Backrest; 4. Seat folding button; 5. Seat detaching button;
6.Frame mechanism; 7.Folding lock; 8.Rear wheels; 9.Brake pedal; 10.Luggage Basket; 11.Front wheels;
12.Detaching latch; 13.Foot rest; 14.Detaching button for front bumper; 15.Front bumper; 16.Sun shade; 17
Canopy; 18.Net canopy part
1.INSTALLING AND REMOVING THE FRONT WHEELS – FIGURES 1-2: Insert the front wheel into the front
frame hole, as shown in Figure 1. Fix it until you hear a "click". To remove the front wheels, press the metal clip
and the wheels are removed easily by pulling out (Figure 2).
2.ORIENTATION OF THE FRONT WHEELS – FIGURE 3: Press the lever downwards to activate the straight
direction of front wheels. Pull the lever upwards to activate the swiveling of front wheels.
3.INSTALLING AND REMOVING THE REAR WHEELS – FIGURES 4-5: Insert the rear wheel into the hole of the
rear frame, as shown in Figure 4. Fix until you hear a click. To remove the rear wheels, push the button and the
wheels are released quickly by pulling out (Figure 5).
4.USING THE BRAKE ON THE REAR FRAME– FIGURE 6:
wheels, press down the pedal on the rear axle (Figure 6). To release the brake, pull up the pedal using your
foot.
5.ADJUSTING SEAT TILT - FIGURES 7-8: Press the strap system button on the back of the seat and move it up to
adjust the seat to the seated position. Press the strap system button and move it down to adjust the seat to
the horizontal position.
6.USING THE FOOTREST – FIGURES 9-11: Buckle up the first buckle under the front part of the seat, then
fasten the second buckle under the front part of the seat to seat the foot rest part when using the seat mode.
7.OPERATION WITH THE CANOPY – FIGURES 12-15: Unzip the zipper on the canopy to get more ventilation.
Zip it up to avoid direct sunlight. Pull the canopy forwards, in order to unfold it and backwards – in order to
fold it.
8.ATTACH AND DETACH THE SAFETY BOARD – FIGURES 16-19: Insert both ends of the safety board into the
two side holes of the frame. Secure the guard until you hear a click (Figure 16). To remove the guard, press the
release button on both sides of the frame and pull at the same time (Figure 17). The safety bumper has a
function of pivoting, it can be opened just one side for easier taking care of baby or putting it in or taking it out
(18-19).
9.CHANGING THE DIRECTION OF CARRY COT/SEAT – FIGURES 20-24: To change the direction of the carry
cot/seat, press the buttons on either side of the seat. Pull out the carry cot/seat, then turn it over to the
desired direction and put it back into the designated slots, as shown in figures.
10.ADJUSTING SEAT RECLINATION - FIGURES 25-31: Pull the handle out, as shown in figure 25 and hold it, at
the same time move the seat upwardly or downward to change the seat angle you want. When the seat unit is
with forward direction, it can be adjusted in three angles.
.
ASSEMBLY STEPS AND USE
PARTS
To activate the parking device and lock the two rear
17
Publicidad
