Publicidad
When the seat unit is with face to face direction , it has three angles as well.
11.SEAT CONVERSION - FIGURES 32-47: On both sides of the back of the seat there is a strap system to change the
position of the stroller (from lying to sitting and vice versa). Buckle the straps under the seat to set the stroller to sitting
mode. Unbuckle the straps to switch to sleep mode. Figures 32 to 47 show the possible positions of the seat/carry cot and
their conversion from carry cot to seat and vice versa.
12. FOLDING THE STROLLER – SEE FIGURES 48-53: Before folding the stroller, activate the parking device and fold the
canopy. The seat must be in the forward direction. Follow the steps, described in Figures 48-53. Fasten the latch.
13.5-POINT SAFETY BELT – FIGURE A: Follow the steps, described in Figure A. To attach the belt, insert the two tabs of
the lap belt into the buckle on both sides, should click when properly inserted. The shoulder straps are fitted as the metal
tabs are assembled and inserted into the buckle. The sliding adjusters are fitted and must be carefully adjusted on each
side so that the belt is fastened around your child without causing discomfort. To release the bely, press the buckle
button, and pull to open.
CLEANING AND MAINTENANCE OF THE PRODUCT
1. Regularly check the locking devices, brakes, safety belts and buckles, connectors and fixing mechanisms in
order to be sure that they are in good working order and are not worn or damaged.
2. If you find loose, broken and damaged parts, they should be repaired by an authorized service or replaced
with original parts. Otherwise the warranty of the stroller will be annulled.
3. Do not make modifications on the construction and do not replace the work parts with ones that are поt
suitable and are not original. This may lead to incorrect functioning of the stroller and to injury of your child.
And also to annulment of your warranty of the stroller.
4. In order to clean the cover, the dirty plastic and metal parts of the product, use soft cotton cloth or sponge,
wetted with water.
5. Never clean with agents containing abrasive particles, ammonia, bleach or alcohol. DO NOT wash in the
laundry the removable and accessories – parts and accessories – canopy, etc., because this may lead to their
damage. Otherwise the warranty will be annulled.
6. Always after cleaning leave the stroller to dry completely and afterwards use it or store it.
7. Store the stroller indoors. The effects of the environment – sea air, roads sprinkled with salt, acid rains, etc.,
as well as the storage outdoors lead to the emergence of corrosion.
8. Do not store the stroller in a humid environment. In case you have used the stroller in a humid environment,
you should unfold it, wipe it with a dry cloth and let it dry completely naturally. It is possible for mold to
appear, if you store it while wet.
9. Too much sunlight will affect the aging of the stroller parts and the fabric.
10. Do NOT place other objects inside the stroller – luggage , bags with goods, handbags etc. when you use it
or storage it, because this could damage the stroller and may lead to harm your child inside of it.
Not following this instruction will lead to guarantee cancel.
Manufactured for Moni in PRC
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90
Website:
www.moni.bg
18
Publicidad
