Salicru CS141 Manual Rápido página 9

If you use the DHCP mode
The Netfinder is a small freeware tool that can help you in case of
using DHCP and you need to know the IP address of your
CS141. The Netfinder will search for all CS141 devices inside
your network and display them accordingly. Download this little
tool directly from our web side: www.generex.de
Run the Setup Wizard
On very first login, the CS141 will start a tool that will help you
with the basic configuration: "System Setup Wizard".
The Setup Wizard will guide you through the most important con-
figuration steps.
Note: In case of the wizard will not start automatically, you may
launch it by clicking:
- System
- Wizard
5. Manual configuration
Select your language
1. On the drop-down menu, select
- System
- General
2. At Region, select your preferred system „Language".
3. With „Apply", settings will be saved.
Choose your UPS
1. Under „Devices", open the menu „UPS" and click on „Setup".
2. At „Model", select the UPS you want to connect to the CS141.
3. Press „Apply" to save your settings.
Configure the local system time
The time is important for accurate event logging.
1. Under system, go to „Date and
2. For the quick configuration, just press:
- Set System Time
Note:
The CS141 provides a preset of time servers -
feel free to customize themn to fit to your network.
Enter a valid IP address
When dealing with large network infrastructures,
a static IP address is recommended.
1. Under „System", select „Network"
2. Enter valid IP address data:
- IP address
- Subnet mask
- Default gateway
- Default DNS server
3. Press „Apply" to save your settings
Time".
EN