Publicidad
Idiomas disponibles
Idiomas disponibles
Inputs: Show or hide an input terminal, change the
label for an input terminal, and configure the options
for HDMI CEC(Consumer Electronic Control) function.
Power
Sleep Timer: Define an idle time after which you
want your TV to enter sleep mode automatically.
Picture off: Select this option and press OK to
turn the screen off. Press a button on the remote
or on the TV to turn the screen on again. Note that
you can not turn the screen on via the Volume +/-,
Mute and Standby buttons. These buttons will
function normally.
Switch off timer: Define a time after which you
want your TV to switch off automatically. Set as
Off to disable.
No Signal Auto Power Off: Set the behaviour of
the TV, when no signal is detected from the currently
set input source. Define a time after which you want
your TV to turn itself off or set as Off to disable.
Picture
Picture Mode: Set the picture mode to suit your
preference or requirements. Picture mode can be
set to one of these options: User, Standard, Vivid,
Sport, Movie and Game. You can use User mode
to create customised settings.
Dolby Vision Modes: If Dolby Vision content is detected
Dolby Vision Dark and Dolby Vision Bright picture mode
options will be available instead of other picture modes.
Brightness, Contrast, Saturation, HUE, Sharp-
ness settings will be adjusted according to the
selected picture mode. If one of these settings is
changed manually, Picture Mode option will be
changed to User, if not already set as User.
Dolby Vision Notification: Set your notification
appearance preference for Dolby Vision content.
When turned on, Dolby Vision logo will be displayed
on the lower right side of the screen when Dolby
Vision content is detected.
Auto Backlight: Set your auto backlight preference.
Off, Low, Middle and Eco options will be available.
Set as Off to disable.
Backlight: Adjust the backlight level off the screen
manually. This item will not be available if the Auto
Backlight is not set as Off.
Brightness: Adjust the brightness value off the
screen.
Contrast: Adjust the contrast value off the screen.
Saturation: Adjust the saturation value off the
screen.
HUE: Adjust the hue value off the screen.
Sharpness: Adjust the sharpness value for the
objects displayed on the screen.
Gamma: Set your gamma preference. Dark, Middle
and Bright options will be available.
Color Temperature: Set your colour temperature
preference. User, Cool, Standard and Warm
options will be available. Set as User to adjust red,
green and blue gain values manually. If one of these
values is changed manually, Color Temperature
option will be changed to User, if not already set
as User.
Picture Format: Set the aspect ratio of the screen.
Select one of the predefined options according to
your preference.
HDR: Turn the HDR function on or off.
Advanced Video
DNR: Set your DNR preference as Low, Medium,
Strong, Auto or turn it off by setting as Off.
MPEG NR: Set your MPEG NR preference as
Low, Medium, Strong or turn it off by setting
as Off.
Adaptive Luma Control: Set your Adaptive Luma
Control preference as Low, Medium, Strong or
turn it off by setting as Off.
Local Contrast Control: Set your Local Contrast
Control preference as Low, Medium, High or turn
it off by setting as Off.
DI Film Mode: Set your DI Film Mode preference
as Auto or turn it off by setting as Off. This item
will not be available if Game Mode or PC Mode
is turned on.
Blue Stretch: Turn the Blue Stretch function
on or off.
Game Mode: Turn the Game Mode function on
or off.
PC Mode: Turn the PC Mode function on or off.
HDMI RGB Range: Set your HDMI RGB range
preference. Auto, Full and Limit options will be
available. This item will not be available, if the
input source is not set as HDMI.
Color Tuner: Set the HUE, Saturation, Bright-
ness, Offset and Gain values manually. Highlight
Enable and press OK to turn this function on.
11 Point White Balance Correction: Adjust the
strength of the Red, Green, Blue colours and Gain
value manually. Highlight Enable and press OK to
turn this function on.
Reset to Default: Reset the video settings to factory
default settings.
Note: Depending on the currently set input source some menu
options may not be available.
Sound
Sound Style: For easy sound adjustment, you
can select a preset setting. User, Standard,
English - 16 -
Publicidad
