Thomas Regout e-Box II Manual De Instalación página 12

®
e·Box II Wall Mount
Use the holes in the bottom of the VESA box to guide the cable for the control panel [R]* to the front side.
13
Guide the cables inside the VESA box. Feed the power cable down through the same holes.
Use cable ties [F] for cable management. Cut the excessive cable ties length.
EN
* The type of control panel
depends on the e·Box
OR
®
model
CLICK
13a) Control panel into slot A2
R
A2
13c) Make sure wires do
not touch the sensor!
SENSOR
12
13b) Make sure the cable is
fully plugged into the slot.
F
OR
F