Thomas Regout e-Box II Manual De Instalación página 9

Gently level the top wall bracket on both sides. Use the circle dot at the motor frames as indicator. Level the
8
bottom wall bracket as well. Make sure the distance between the wall brackets is at least 200mm / 8". Tighten
the screws when the brackets are in the correct position.
9
Slide the VESA box [H] over the motor frame from the top.
Tighten with appr. torque
of 5.2 ft·lb [7 N·m]
9
®
e·Box II Wall Mount
H
EN