Publicidad
Idiomas disponibles
Idiomas disponibles
15. Sensitivity adjustment
16. Shade adjustment
17. Segmented positioning plate
18. Headgear screw
19. Headband tightness adjustment knob
20. Headgear connector
3.0
Method of Operation
3.1
Before use
Check for light tightness and check that the inside & outside protection lens is clean and that no dirt is covering the
sensors on the front of the auto-darkening-filter (ADF) cartridge.
Make sure the protection films on both inside & outside protection lens are removed.
Inspect all operating parts for signs of wear or damage. Any scratched, cracked or pitted parts should be replaced
immediately.
Screen Icon Explanation
1
Battery status
6
Sensitivity indication:
1 (low) to 5(high)
Note: Buttons on the left of the screen need to be pressed twice to start any settings. Otherwise they will not operate.
INST-WHP4000, S26400_1.17.18
3
2
Welding
Grinding
indication
indication
7
Delay indication:
1 (short 0.1s) to
5 (long 0.9s)
21. Long headgear screw
22. Washer insert
23. Headband adjustment
24. Segmented position plate
25. Sweatband
26. Position post
4
Shade range 5-9
8
Shade reading
5
Shade range 9-13
9
Memory selection
Page 3 of 6
Publicidad
