Publicidad
Idiomas disponibles
Idiomas disponibles
1
A
P6019ASS16
3
A
P61318ASS16
PEDESTAL FIXING
The filter pump must be vertically fixed on ground or a certain pedestal made of wood or concrete before use. There should
be two holes 9mm in diameter on the pedestal, the space between which should be 159mm. Put filter pump on the pedestal
and fix them together by fasten the bolts and nuts. All the pedestal parts should weigh over 18kgs at least to prevent the pump
from accidentally falling.
NOTE:
It is imperative to check that the hydraulic connectors are not closed.
OPERATION
1) Open/unscrew the Air Purge Valve on the top of the Filter Pump; air is released as water fills the Filter Pump.
2) When water comes out of the Air Purge Valve screw it closed and wipe away any water.
3) To start the Filter Pump, insert the plug.
B
P6019ASS16
B
P61322ASS16
2
A
A
A
B
B
4
A
2-M8 nut
2-M8 bolt
6
B
A
B
B
P6124ASS16
Publicidad
