HIKOKI C 12RSH3 Instrucciones De Manejo página 16

English
87 Hose (id 38 mm)
88 Adapter (Dust extractor's standard accessory)
89 Joint (C) (Optional accessory)
90 Dust collection adapter (Optional accessory)
91 Hose band (Optional accessory)
92 Duct
93 Washer (B)
94 8 mm hex. bar wrench
95 Washer (A)
96 Base grip
97 Piece of wood to secure the vise
98 Wear limit line
99 No. of carbon brush
100 Brush cap
101 Groove
102 Air gun
103 Holder
104 Height adjustment bolt 8 mm
105 6 mm wing bolt
106 6 mm bolt
107 Steel square
108 Dust guide
109 Mounting position of the sub fence (A)
110 Mounting position of the sub fence (B)
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
C12RSH3: Slide Compound Miter Saw
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools that
have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
V
Rated voltage
Switching ON
0
Switching OFF
Disconnect mains plug from electrical outlet
Always wear eye protection.
Always wear hearing protection.
Do not stare at operating lamp.
Warning
Class II tool
STANDARD ACCESSORIES
○ 305 mm TCT Saw blade
(mounted on tool)......................................................... 1
○ Dust bag....................................................................... 1
○ 8 mm hex. bar wrench.................................................. 1
○ Vise Assembly ............................................................. 1
○ Holder .......................................................................... 1
○ Sub Fence (mounted on tool)....................................... 1
○ Holders ........................................................................ 2
○ Sub table assembly...................................................... 2
Standard accessories are subject to change without notice.
APPLICATIONS
Cutting various types of aluminium sash and wood.
SPECIFICATIONS
1. Power tool
Model
Voltage (by areas)*
1
Power Input* 1
No-Load Speed
Saw Blade Dimensions (oD × iD ×
Thickness)
Maximum kerf
Miter Cutting Angle
Bevel Cutting Angle
Compound Bevel (Left)
Cutting Angle 0°–45°
16
C12RSH3
110 V~ 230 V~
1520 W
4000 min- 1
305 mm x 30 mm x 2.3 mm
2.8 mm
Right 0°–57°, Left 0°–45°
Right 0°–45°, Left 0°–45°
Miter (Left) 0°–45°, (Right) 0° –45°