neno Ivo Manual Del Usuario página 13

5. Keep cables out of the reach of children.
6. Do not keep the camera near water or heat sources.
7. Use only the original parts supplied with the product.
8. Do not touch the contacts of the power socket with sharp or metallic objects.
9. Do not attempt to open the device's covers.
ATTENTION: The range of the device is affected by external factors (e.g. walls, high-voltage lines, other electrical
equipment), so the actual range may be less than specified.
CONTENTS OF THE KIT
1. Monitor
2. Camera
3. Power supply x2
4. Flexible handle
5. Installation kit
6. Manual
01. PRODUCT DESCRIPTION
A. RECEIVER/MONITOR
SEE FIG. A
1. Charging indicator
2. Zoom button
3. MENU and back button
4. Performance indicator
5. Control buttons (menu navigation/volume/brightness, camera rotation)
6. Confirmation button
7. Microphone
8. Two-way communication button
9. Lullabies
10. Antenna
11. USB-C charging port
12. Loudspeaker
13. Fold-out footplate
14. Reset button
15. Switch
B. TRANSMITTER/CAMERA
SEE FIG. B
1. Light sensor
2. Microphone
3. Reset button
4. Camera lens
5. Infrared LEDs
6. SD card slot
7. Call button
8. Loudspeaker
9. Temperature and humidity sensor
10. Power and pairing indicator
11. USB-C charging socket
12. Pairing button
02. INSTALLATION OF THE DEVICE
Before mounting the camera, check the preview to ensure that the frame fits and covers the required view.
Check for correct signal reception. If necessary, move the camera to get a better signal.
1. Connect the power supply to the camera and power source.
2. Connect the power cable to the monitor and power source, then switch on the screen. It is recommend-
ed to fully charge the battery before first use.
3. Place the camera in a convenient location. The camera can be stood, mounted on a flexible bracket or
hung using the mounting kit. Disconnect the power supply before mounting and reconnect after correct
installation.
4. Assembly methods:
13