neno Ivo Manual Del Usuario página 14

Method 1: Place the camera on a flat, dry surface. SEE FIG.C
Method 2: The product comes with a kit with which you will mount the camera on the wall. Using
screws and dowels, screw the cap onto the wall and then screw the camera onto the thread. Check that
the camera is correctly fixed and will not fall out of the thread. SEE FIG.D
Method 3: A flexible bracket is included with the product, with which you mount the camera in the
location of your choice. Wind the bracket and then screw the camera onto the thread. Check that the
camera is correctly attached and will not fall out of the thread. SEE FIG.E
CAUTION: Ensure that the camera and power cable are mounted out of the reach of the child and do not create
a hazard. Poor mounting can lead, for example, to a child being strangled by the cable.
03. SCREEN AND ICONS
SEE FIG. F
1. Date
2. Hour
3. Air humidity at the camera site
4. Temperature at the camera site
5. Night mode indicator
6. Indicator for motion detection function activated
7. Cry detection indicator on
8. Indicator showing feeding reminder activated
9. Indicator for activated or muted sounds
10. Signal strength indicator
11. Battery indicator
12. Volume indicator
13. Screen brightness indicator
04. RECEIVER MAIN MENU
SEE FIG. G
To enter the main menu, press the "MENU and return" button.
1. Camera
2. Feeding reminder
3. Event alarm
4. Temperature and humidity alarm
5. Lullabies
6. Display settings
7. Service
8. System settings
START OF CAMERA OPERATION WITH RECEIVER
05. PAIRING THE CAMERA WITH THE RECEIVER
The monitor and camera are paired with each other at the factory. They do not need to be paired with each
other again unless there has been a loss of connection.
In this case, follow the instructions:
1. Press the MENU button to enter the main menu.
2. Select the "camera" icon and press "OK".
3. Press "OK" again to start pairing.
4. You now have 30 seconds to hold down the pairing button on the camera until you hear a beep, about
3 seconds.
5. After successful pairing, the receiver will return to the home screen and display the image from the
paired camera.
06. USE OF THE DEVICE
A. CAMERA HEAD CONTROL
When viewing the camera, you can rotate the head using the control buttons on the receiver within the
range of head movement.
B. ZOOM
While viewing the camera, press the "Zoom" button on the monitor to zoom in on the preview image 2 or
14