Descargar Imprimir esta página

Hitachi CP-A220N Manual De Usuario página 238

Publicidad

PJLink command (continued)
Commands
Control Description
ERST ?
Error Status inquiry
LAMP ?
Lamp Status inquiry
INST ?
Input Source List inquiry
NAME ?
Projector Name inquiry
Manufucturer's Name
INF1 ?
INF2 ?
Model Name inquiry
INFO ?
Other Information inquiry
CLSS ?
Class Information inquiry 1
NOTE • The password used in PJLink
the Web Brouwser Comtrol. To use PJLink
any password in Web Browser Control.
• For specications of PJLink
Machine and Information System Industries Association.
URL: http://pjlink.jbmia.or.jp/
1st byte: Refers to Fan error; one of 0 to 2
2nd byte: Refers to Lamp error; one of 0 to 2
3rd byte: Refers to Temptrature error; one of 0 to
2
4th byte: Refers to Cover error; one of 0 to 2
5th byte: Refers to Filter error; one of 0 to 2
6th byte: Refers to Other error; one of 0 to 2
The mearning of 0 to 2 is as given below
0 = Error is not detected; 1 = Warning; 2 =
Error
1st number (digits 1 to 5): Lamp Time
2nd number : 0 = Lamp off, 1 = Lamp on
11 12 22 23 31 41 51 52
Responds with the name set in "PROJECTOR
NAME" of "NETWORK"
HITACHI
inquiry
CP-A220N
CP-A300N
Responds with the factory information and so
on
, see the web site of the Japan Business
TM
Parameter or Response
is the same as the password set in
TM
without authentication, do not set
TM
32

Publicidad

loading

Este manual también es adecuado para:

Cp-a300nCp-a220nmCp-a300nm