Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly Doors
( continued)
Lift upper D- ring (0) up to engage in front of Roof (H).
Turn D- ring to right for locked position.
Insert two screws ( I I) into door latch assembly (00)
and through right door. The screws will need to puncture
through a thin layer of plastic to get through the door.
While holding plate in place on exterior of door, secure
each screw with two washers (RR) and two locking
nuts (SS).
Push lower D- ring (0) down to engage with hole in floor.
Turn D- ring to right for locked position.
Insert screws ( I I) into left latch plate (NN) and through
left door. The screws will need to puncture through a thin
layer of plastic to get through the door. While holding
plate in place on exterior of door, secure each screw with
two washers (RR) and two locking nuts (SS).
17
Publicidad
