Kerbl Connect BT 345130 Instrucciones De Uso página 11

(EN) KERBL WORKS CONNECT BT
HEARING PROTECTION WITH BLUETOOTH
Art. no 345130
345130 is a protection ear muff with electronic function of BLUETOOTH
EN352-6:2020, EN352-8:2020 requirement.
This product is intended use Electronics earmuff with textile headband for hearing impaired workers to safe the user for
hearing lose, in the noise environment (for example >85dB), the device can protect the wearer not get hurt in proper use.
Please read the entire instruction manual before using the product and then save it for future reference. We reserve the
right for any errors in text or images and any necessary changes made to technical data. If you have any questions
concerning technical problems please contact Albert Kerbl GmbH, Felizenzell 9, 84428 Buchbach, Germany,
Tel: +49 8086 933-100, www.kerbl.com, info@kerbl.com.
SAFETY:
• Warning: Do not use ear defenders whilst driving a vehicle in traffic, it can affect your concentration and lead to an
accident. Remember to always remove the ear defenders when cycling, walking, crossing roads, at railway crossings,
or in other situation requiring your full attention.
• Never subject the product to high temperature, dust, heavy vibration, impacts, humidity or moisture. Bear in mind that
a car left in the summer sun can become very hot. Never leave the product where it could be subjected to high
temperatures or direct sunlight, such as on a car dashboard or windowsill. The recommended storage temperature of
the product is -20 to + 45 °C. The recommended operating temperature range is from -20 to 35 °C.
• Before use, make sure that the ear cushions are whole and form a tight seal against your head.
• Never use the product in extremely dry environments where static electricity easily occurs.
• Use the ear defenders the entire time that you are exposed to a noisy environment.
• Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
• The earmuffs should be fitted, adjusted and maintained according to the information of the manufacturer.
• The earmuffs should be regularly inspect for the necessity of maintenance.
• Failure to follow the recommendations will seriously impair the protective effect of the earmuffs.
• This product may be adversely affected by certain chemical substances and further information should be sought from
the manufacturer.
• It is intended to be charged by ES1, PS1 circuit and output voltage of 5 V DC, 1 A.
ADJUSTING THE FIT:
1. Brush any hair of your ears, remove any earrings, pull the ear cups apart and place
them over your ears.
2. Position the ear cups so that the cushions form a tight seal around ears. Make sure
that no hair comes between the cushions and your head.
3. Adjust the headband, Hold the headband down against your head with one hand
and push the ear cups up until they sit comfortably over your ears.
4. The headband should rest on the top of your head and the ear cups should
completely cover your ears.
Note: The effectiveness of the ear defenders could be diminished by the temples
of spectacles if they are worn under the ear cups.
CHANGING THE CUSHIONS:
1. Take off the cushions from the base.
2. Fix the new cushions.
3. Check the cushion to see is there any turn up, and ensure the cushions are
fixed on the base well.
Note: earmuffs and in particular cushions, may deteriorate with use and should
be regularly checked for cracking and leakage if hygiene covers are fitted to the
cushions it may affect the acoustic performance of the ear muffs the replaceable
cushions are able to get from the manufacturer.
®
, meets EN352-1:2020, A1:2020, EN352-4:2020,
®
EN
EN
Base Cushion
11