KingSmith WalkingPad ORWKPG1 Manual Del Usuario página 8

4. Operational Instructions
1. Start running
1. After this product is powered on, the console will
be lit up, and all parameters will be displayed as
"0" by default.
Short press
3. Short press the spin controller for 3 seconds in
the default mode to start the Treadmill slowly.
2. If the security lock is not inserted, the
console will display "SAFE", meaning the
"safe" mode is activated. In this case, the
Treadmill cannot start normally, so please
insert the security lock.
Spin
4. Rotate the spin controller clockwise to
accelerate during movement. Rotate the spin
controller counterclockwise to decelerate
during movement.
Short press
5. Fast speed regulation: Rotate the spin controller quickly to
switch the speed levels, which will be switched among
levels 1, 2,4,6,and 7.5.
Long press
7. In the pause mode, after the spin controller is long pressed
for 2 seconds or no-operation state lasts for 10 minutes, all
parameters on the console will return to "0" by default and
the Treadmill will enter the standby mode.
6. After the spin controller is short pressed during movement,
or after the no-load operation lasts for 1 minute, the
Treadmill will slowly stop and enter the pause mode. Then,
short press the spin controller again to restart the Treadmill,
which will return to the original speed level before the pause.
8. After finishing your exercise, please turn off the power
switch and put away the power cord.