Do not set the Mobile Handheld Computer, battery, docking station
or power supply near heat sources (heater blowers, etc.) and never
subject it to direct solar radiation, excess quantities of dust or
shocks. Make sure that there is no stumbling hazard due to
ATTENTION
connection cable or power supplies.
To prevent overheating, the Mobile Handheld Computer, battery,
docking station, and the power supply may not be covered while
they are in operation.
ATTENTION
7 Warning and Safety Notices
Please read the following warning and safety notices. They are for your safety and to ensure that the Mobile
Handheld Computer is ready to use.
Only operate the touch screen with your fingertips or a touch pen
intended for this purpose. Never use a pen or other pointy objects.
ATTENTION
Before using the Mobile Handheld Computer and associated
components near medical devices (e.g. pacemakers), ask a doctor
or the manufacturer of the medical devices.
ATTENTION
The Mobile Handheld Computer, battery and docking station may
not be used in areas subject to explosion.
ATTENTION
Before use, the Mobile Handheld Computer, battery, docking
station, power supply, and any connection cables must be
checked for damage. Damaged parts must be replaced. For this,
please contact ACD Elektronik GmbH.
ATTENTION
If metal chips or other conductive parts get into the battery
compartment, switch off the Mobile Handheld Computer
immediately and clean it.
ATTENTION
Unintended use of the interfaces is forbidden.
ATTENTION
The device may only be opened by trained specialized personnel.
Opening the battery is prohibited.
ATTENTION
Excessive sound pressure from earphones, headphones and
headsets can cause hearing loss.
ATTENTION
M2SmartSE Set_Brief Overview_Resumen breve_Aperçu rapide_FCC_V1.01_en_es_fr
11 / 92