ACD GRUPPE M2Smart SE Set Guía Breve página 22

9.2 Power supply
®
The M2Smart SE and the replacement rechargeable battery may only be charged in the DS2Smart
station and the two replacement rechargeable batteries may only be charged DS2Battery docking station
with the appropriate power supply.

External power supply for DS2Smart
Input voltage
Output voltage

Power cable (country-specific)
Make sure there is no risk of stumbling over connection cables or
power packs.
ATTENTION
9.3 Interfaces
®
DS2Smart Charging and transmission box
The interfaces of the docking station DS2Smart
These are mounted on the rear.
Figure 20: Interfaces of the DS2Smart
The connections are described from left to right:

The USB socket type A is the USB host interface. The connected USB devices are identified by the
USB host adapter in the M2Smart

The RJ45 socket is the Ethernet interface (10/100 Mbit). The network communication takes place via
the Ethernet interface on the M2Smart

Insert the DC connector of the power supply in the DC socket for the supply voltage.
M2SmartSE Set_Brief Overview_Resumen breve_Aperçu rapide_FCC_V1.01_en_es_fr
®
/DS2Battery
~
100 - 240 V AC; 1.0 A max.; 50 - 60 Hz
15 V DC; 2.4 A
®
Charging and transmission box
®
SE.
®
SE.
®
Charging and transmission box will be described below.
®
docking
22 / 92