Publicidad
Idiomas disponibles
Idiomas disponibles
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can emit radio frequency energy and, if not installed and used in
NOTE
accordance with the instruction manual, may cause interference
with certain radio communications.
If the rechargeable battery is damaged during installation, please
replace it appropriately right away.
ATTENTION
The device has the following radio systems:
WLAN, BT-compatible short-range radio, RFID
Frequency bands:
ATTENTION
Max. permissible transmission power on the frequency band:
If the display is in idle mode, it can be reactivated by briefly
pressing the power button.
NOTE
Do not release the camera flash or scanner directly into the
eyes of a person in the immediate vicinity, or with them
themselves, since this damages the retina of the eyes can.
NOTE
M2SmartSE Set_Brief Overview_Resumen breve_Aperçu rapide_FCC_V1.01_en_es_fr
WLAN
2.412 GHz – 2.472 GHz
5.15 GHz – 5.35 GHz
5.47 GHz – 5.725 GHz
BT-compatible short-range radio
2.402 GHz – 2.480 GHz
RFID
13.56 MHz
WLAN 2.4 GHz band max. 100 mW
WLAN 5 GHz band max. 200 mW
BT-compatible short-range radio max. 100 mW
Max. 42 dBµA/m in 10 m distance (mag. Field strength)
12 / 92
Publicidad
