Equipment Maintenance And Repair; Overview; Equipment Maintenance; Equipment Repairs - ENAG CDS412V/25A Manual Del Usuario

4

EQUIPMENT MAINTENANCE AND REPAIR

4.1 O
VERVIEW
This paragraph deals with equipment maintenance and repairs. Proper operation of the product and its service life are
dependent on strict compliance with the following recommendations.
4.2 E
QUIPMENT MAINTENANCE
Disconnect the battery charger from the AC network and the batteries before starting any maintenance work.
If appliances are in a dusty atmosphere, vacuum-clean them regularly, since dust deposits may adversely affect heat
dissipation.
Check the state of battery charge every 3 months.
Nuts and screws should be tightened annually to ensure efficient operation of the appliance (particularly in rugged
conditions: vibration, shock, high variations in temperature etc.).
4.3 E
QUIPMENT REPAIRS
Disconnect the battery charger from the AC power network and disconnect the batteries before undertaking any
repairs.
When fuses have blown, only use fuses of the type and size recommended in this manual.
Please contact ENAG or their distributor for any other repairs.
Any repair without ENAG prior agreement entails an exclusion of warranty.
CDS4-1M-2M-G - 03 EN.docx
33