ACD GRUPPE Voxter Elite+ Set Instrucciones Breves página 9

4.1.4 Switching on the Voxter Elite+
To turn on the voice client please use the following key:
"On/Off button" (hold for approx. 2 seconds)
The status LED lights orange as soon as the Voice Client is switched on.
Once the boot sequence has been completed, the customer software assumes control of the status LEDs
You can see the button, you have to press to switch on the device as shown in Figure 5.
Figure 5: Switching on the Voxter Elite+
4.1.5 Switching off the Voxter Elite+
To switch off the voice client please use the following button:
"On/Off button" (hold for approx. 5 seconds)
The status LED goes out as soon as the voice client is switched off.
Figure 6: Switching off the Voxter Elite+
Voxter Elite+ Set_Brief Overview_Resumen breve_FCC_V1.03_en_es 9 / 26