PROMEBA PS-251 Manual De Instrucciones página 86

USER GUIDE
EN
CHAIR PS-251 + PA-260
06 OPERATION
REV. 2023/11
06.4. Functioning (track)
START UP OF THE TRACK
To start using the power track, it is necessary to charge the battery. To do this, locate the
external socket with female connector 2.1, located on the back of the track as shown in the
picture (A).
If you have the PA-271 support and its installation and you have requested the PA-260 track
with integrated load, you can start loading the track as shown in the image (B), place the
track on the stand and start charging automatically.
Always charge the battery up with the charger supplied by PROMEBA to its maximum charge
level (approx. 60min. are enough).
Only charge the batteries of the track with the charger supplied by PROMEBA, otherwise it
could damage the batteries and you will lose their warranty.
86