Clean Air Optima CA-407W Manual Del Usuario página 6

Remote control
1. Open the battery cover at the back side of remote control to place the battery, (see Picture 1).
2. To place the battery: there is a "security tab" at the bottom of the remote control that you first have to
slide to the right and then pull out the battery holder, (see Picture 2).
Insert the battery with the correct polarity, (see Picture 3).
3. Push the battery cover back into the remote control.
Remote control
Features
1. Touch control buttons
2. Wind modes: Normal, Nature, Sleep mode
3. 12 speeds
4. Powerful airstream of 6 m/s
5. Fan air flow rate up to 450m3/h
6. Automatically 80°horizontal oscillation
7. Timer: 1 -12Hours
8. Sterilization by plasma generator
9. LED display: ON/OFF, wind speed, wind modes, oscillation
10. Remote control
11. WIFI function
6
(Picture 1)
(Picture 3)
Battery cover
(Picture 2)
Battery (CR2032)