Publicidad
Idiomas disponibles
Idiomas disponibles
3. Sleep mode
3.1. Timed downshift. If the device is running at speed 4-12, the device will switch down one
speed every 5 minutes until it reaches the 3rd speed. The device then continues to run
unchanged in 3rd speed.
The LED light displays the current wind speed.
3.2. If the device runs in speed 1-3, the device switches to 3d speed.
The device then continues to run unchanged in 3rd speed. The LED light displays the normal
wind speed.
TIMER
Press TIMER button to program timer.
Following timer programs are available.
Power-on function: While the device is in standby, press the Timer button and then use the +/-
button to set the number of hours you want the unit to start (1~12 hours).
Power-off function: While the device is running with the desired settings, press the Timer button
and then use the button +/- to set the number of hours after which you want the device to stop
(1~12 hours).
SWING
Press the Swing key: the device will oscillate.
Press the Swing key again: the device will stop oscillating.
Sterilization/ plasma generator
Function on: the device releases plasma, and the indicator light is on.
Function off: the device stops releasing plasma, and the indicator light is off.
LIGHT
Press the Light button, the lighting on the display will go off.
Press the Light button once again, the lighting on the display will go on.
When the device is on, the light on the display dims automatically after 1 minute. When you press
a button, the light automatically turns on again.
WIFI Function
When the device is on, press and hold the Mode button for 5 seconds till it beeps once. The WiFi
indicator will flash quickly after 5 seconds, and you can configure the network in the default
mode of the App. If it is not connected within 3 minutes, the WiFi indicator will turn off. To con-
nect again, you need to press and hold the timer button for 5 seconds till it beeps once to reset
the WiFi module, the WiFi indicator will flash quickly and you can restart to configure the network
in the default mode.
1.
If the power is turned off within 10 seconds after power on, the WiFi indicator will return to the
state before power off. If the power is turned on again after 10 seconds of power off, the WiFi
indicator will go off and the device will enter the low-power mode. At this time, you need to press
and hold the mode button for 5 seconds to restart it.
2.
In the process of accessing network, if the network is not matched within 3 minutes, the WiFi
indicator will go off. You need to press and hold the mode button for 5 seconds to restart it.
3.
If the router is powered off after the matching has been completed, the WiFi indicator will go off.
When the router is resumed, the WiFi will be automatically connected to the network.
8
Publicidad
