Publicidad
Idiomas disponibles
Idiomas disponibles
EN
8.1.2 Cleaning the dust container filter
NOTICE It is recommended to clean the foam filter (15) when it is visibly dirty. It
may require more frequent cleaning if vacuuming fine dust.
1 Lift the dust container filter lid (Fig. 14).
14
2 Pull the foam filter (15) from the lid (Fig. 15).
15
3 Rinse the foam filter (15) with warm water to wash away dust buildup and residue.
4 Allow at least 24 hours for the foam filter (15) to dry completely.
5 Place the foam filter (15) back into the dust container filter lid.
8.1.3 Cleaning the cyclone (cyclone filter and inlet cup)
NOTICE It is recommended to clean the cyclone filter (16) when it is visibly dirty or
clogged. It may require more frequent cleaning if vacuuming fine dust.
1 Lift the dust container filter lid (Fig. 13).
14
15
Publicidad
