Publicidad
Idiomas disponibles
Idiomas disponibles
3 Grab both ends of the brush roll (9) and pull it out from the drive belt (Fig 23)
23
4 Remove any string, hair, carpet fiber or other obstructions.
5 Reposition the brush roll (9) on the drive belt and push the brush roll (9) into the
brush cover (Fig 24)
24
6 Rotate the brush roll (9) a few times to make sure it aligns with the drive belt
7 Refit the base plate onto the brush cover.
8.3 Maintenance
» Any other servicing than mentioned in this manual should be performed by a
professional repair center
» Switch off and unplug the appliance before performing maintenance.
1
1
2
9
9
EN
2
19
Publicidad
