Descargar Imprimir esta página

Husqvarna CA230 Manual De Usuario página 6

Ocultar thumbs Ver también para CA230:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 251
these checks, contact your service agent to
get it repaired.
WARNING:
work on the product requires special
training. This is especially true of the
product's safety equipment. If your product
fails any of the checks described below
you must contact your service agent. When
you buy any of our products we guarantee
the availability of professional repairs and
service. If the retailer who sells your product
is not a servicing dealer, ask him for the
address of your nearest service agent.
To do a check of the cutting equipment
The tines are designed and machined to withstand the
loads resulting from cultivating.
The two basic rules:
1. Only use cutting attachments with the guards we
recommend!
2. Check the cutting attachment for damage or cracks.
A damaged cutting attachment should always be
replaced.
To do a check of the cutting attachment guard
This guard is intended to prevent loose objects from
being thrown towards the operator. The guard also
protects the operator from accidental contact with the
cutting attachment.
6
All servicing and repair
1. Ensure that the guard is undamaged and is not
cracked.
2. Replace the guard if it has been exposed to impact
or is cracked.
Safety instructions for maintenance
WARNING:
instructions that follow before you do
maintenance.
WARNING:
before you work on any part of the
attachment. It can continue to move even
after the throttle/power trigger is released.
If you have a gasoline operated product,
disconnect the HT leads from the spark
plug. If you have a battery operated product,
remove the battery. Ensure the attachment
has stopped completely before you start to
work on it.
Cultivating should only be done in daylight or other
well-lit conditions.
Check the entire product before starting. Replace
damaged parts. Check that all guards and covers
are complete and fastened securely. Check all nuts
and screws.
If you have a gasoline operated product, make sure
that there are no fuel leaks.
Check that the blades are undamaged and show
no signs of cracking or other damage. Replace the
blades if necessary.
Read the warning
Always stop the product
742 - 004 - 16.11.2022

Publicidad

loading