Toshiba Carrier RBC-AXU33UP-UL Manual De Funcionamiento página 12

Once you select the timer operation mode, the settings
are saved in the remote controller. Thereafter, the
air conditioner will start operating under the same
conditions when you simply press the ON/OFF button of
the remote controller.
If the clock display is flashing, you cannot set the timer.
Follow the instructions in the section "SETTING THE
CLOCK" and then set the timer.
Combined timer (Setting both ON and OFF
timers simultaneously)
OFF timer ➞ ON timer
(Operation ➞ Stop ➞ Operation)
This feature is useful when you want to stop the air
conditioner after you go to sleep, and start it again in the
morning when you wake up or you return home.
Example:
To stop the air conditioner and start it again next
morning.
Operation
▼ Setting combined TIMER
1. Press the OFF TIMER
timer.
2. Press the ON TIMER
timer.
3. Press the SET
11-EN
Operation again
Stop
button to adjust the OFF
button to adjust the ON
button.
ON timer ➞ OFF timer
(Stop ➞ Operation ➞ Stop)
You can use this setting to start the air conditioner when
you wake up and stop it when you leave the house.
Example:
To start the air conditioner next morning and stop it.
Stop
▼ Setting combined TIMER
1. Press the ON TIMER
ON timer.
2. Press the OFF TIMER
OFF timer.
3. Press the SET
• Either ON or OFF timer function which is closer to the
current time, is activated first.
• If the same time is set for both ON and OFF timers, no
timer operation is performed. Also, the air conditioner
may stop operating.
Every day combined timer (setting both ON
and OFF timer simultaneously and activate
every day.)
This feature is useful when you want to use combined
timer at the same time every day.
▼ Setting combined TIMER
1. Press the ON TIMER
ON timer.
2. Press the OFF TIMER
OFF timer.
3. Press the SET
4. After step 3, an arrow mark (
about 3 seconds and during this flashing, press the
SET button.
• During the every day timer is activating, both arrows
( , ) are indicated.
Cancel the timer operation
Press the CLR
Clock display
During the TIMER operation (ON-OFF, OFF-ON, OFF
timer) clock display is disappeared so as to show the
setting time. To see the present time, press SET button
briefly and the present time is displayed about 3 seconds.
- 11 -
Operations Manual
Operation
button to adjust the
button to adjust the
button.
button to adjust the
button to adjust the
button.
or ) flashes for
button.
Stop