SMD SUGON T21 Guia De Inicio Rapido página 5

Safety Attention
When the power is on Temperature greater than
100℃-450℃ (212℉-842℉)， abuse of use May
even lead to fires or burn，Please strictly observe
the following matters：
1 Please don't touch the iron tip and Metal area.
2 Please do not use near inflammable goods
3 The soldering iron tip is very hot，It may cause
dangerous accidents，Please turn off the power
after using it.
4 When change parts，please off the machine
and wait for tip cooling
In order to avoid damage of soldering station,
Please strictly obser ve the following matters
1 This product uses rated voltage and frequency
（Please refer to the label on the back of the
machine）
2 It is strictly prohibited to use this product when
it is damaged，especially when the power cable
is damaged
3 This product uses a three-wire grounding plug,
must be inserted into a three-hole grounding
socket.If you need to extend the cord, use a
grounded three-wire power cord.
4 Please do not use soldering iron for any work
except welding
5 Do not knock the soldering tip on the workbench
to clean it，this may seriously damage the
soldering tips
6 When replacing parts, please use original
factor y parts
7 Do not tamper with the soldering iron without
Safety Precautions
8 Please do not wet the soldering iron, and do
not use it when your hands are wet
9 There will be smoke when welding, please
confirm the ventilation environment
10 Do not harm the body when using the machine
11 Children are unaware of how dangerous
electric products can be. Don t use or store this
station in a place accessible to a child.
Don' t allow a child to get near or touch this station.
P07
Product parameter
Input voltage: AC100-240V 50/60Hz
Power : 120W
MAX POWER:160W(MAX)
Temperature control range:
100℃-450℃ (212℉-842℉)
Notice:This machine can use 115/
210/245/470 TIPS
Function Description
Hub
Handle
bracket
Set key
Display
area
Save
key
Handle
Temperature
adjustment
Silicone
storage
box
To clean the
copper brush
P08