B. External Power Supply (Optional)
EN
The camera can be powered by an external
DC power supply adapter (Not included).
DC adapter: 6V/2A (3.5 mm external and
1.35mm internal diameter)
2. Insert and format the SD Card
Insert SD card
in OFF mode
Note:
• Insert a Class 10 or higher class SD card up to 256GB (U3 recommend).
• Insert or remove the SD card when the camera is in "OFF" mode.
• If you insert or remove the SD card in setup mode, the camera will shut itself down.
• Format the new SD card before using the camera.
• If camera displays "Card protected", remove the memory card and change the
card Lock position.
Switch to
SETUP mode
LOCK
Write Protection
unlocked
8
Format SD card
for first time use
LOCK
Write Protection
Locked