EN: MEAT GRINDER WITH TOMATO JUICER | Instruction Manual
NOTE: 1. Do not push food too hard. The force should not exceed 5N.
2.No load time should not be too long, not more 30s.
Put the funnel insert the tube.
2. Put clean cup below the juice spout to catch juice, put another bowl below the dreg discharge tube to catch dreg.
3. Put power cord plug into power socket, make power on.
4. Press "ON" button, the squeezing tube working, after product working normally, put the tomato, grape into funnel hole,
and push down to the lowest position by food pusher. Note: The fruit size can't be too big; can't cut too hard fruit and
vegetable for example the apple, carrot.
5. Making juice: after working 15 seconds or making juice for 200g fruit, take a rest of 2 minutes, this is one cycle (clean the
filter and squeezing tube when rest), can work 5
cycles, it means making juice for 1000g fruit.
6. Disassembling method of squeezing tube and main body: press the release button by left hand, then turn out the
squeezing tube in clockwise. Loosen your left hand, at this time, the squeezing tube had been taken out. (Note: this process
must be operated in power off condition).
MAKING SAUSAGES
Аssemble the sausage attachment as per following. (see Fig. 7)
REVERSE FUNCTION
In case of jamming press the rocker switch to "O" position. wait at least one minute until ream meat rod has come to a complete
stop.
Press the rocker switch to "R" position, Ream meat rod will be rotating anti-clockwise, and the ream meat tube will get empty. If
the main machine doesn't work, press the rocker "O" and clean it.
NOTE: The "R" position max operation time shall not exceed 5S.
1. Fig. 7
Fig.6
Fig. 7
7