RODCRAFT RC7028 Manual De Funcionamiento página 4

Safety Information
Declarations
EU Declaration of Conformity
We, Desoutter GmbH, Edmund-Seng-Str. 3-5,
63477 Maintal, Germany, declare under our sole
responsibility that the product (With name, type,
and serial number, see the front page) is in con-
formity with the following Directive (s):
2006/42/EC (17/05/2006)
Harmonized standards applied:
EN ISO 11148-9:2012
Authorities can request relevant technical infor-
mation from:
Pascal Roussy, R&D Manager, Ets Georges Re-
nault, 38 rue Bobby Sands, BP10273 44818
Saint Herblain, France
Saint-Herblain, 17/05/2016
Pascal ROUSSY
UK Declaration of Conformity
We, Desoutter GmbH, Edmund-Seng-Str. 3-5,
63477 Maintal, Germany, declare under our sole
responsibility that the product (with name, type
and serial number, see front page) is in conform-
ity with the following UK Regulation(s):
Supply of Machinery (Safety) Regulations 2008
Designated Standards applied:
EN ISO 11148-9:2011
Saint-Herblain, 21/01/2022
Pascal ROUSSY
Authorities can request relevant technical information from:
UK Authorized Representative:
Air Compressors & Tools Ltd
Zodiac – Unit 4, Boundary way
Hemel Hempstead Industrial Estate, HP27SJ Hempstead
Hertfordshire – UK
Contact: M.Taylor
Noise and Vibration
These declared values were obtained by laboratory type test-
ing in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. These declared values
are not adequate for use in risk assessments and values mea-
sured in individual work places may be higher. The actual ex-
posure values and risk of harm experienced by an individual
user are unique and depend upon the way the user works, the
workpiece and the workstation design, as well upon the expo-
sure time and the physical condition of the user.
We, Desoutter GmbH, cannot be held liable for the conse-
quences of using the declared values, instead of values re-
flecting the actual exposure, in an individual risk assessment
in a work place situation over which we have no control.
4
This tool may cause hand-arm vibration syndrome if its use is
not adequately managed. An EU guide to managing hand-arm
vibration can be found by accessing
index.php
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration expo-
sure, so that management procedures can be modified to help
prevent future impairment.
Regional Requirements
Signature
Safety
DO NOT DISCARD - GIVE TO USER
Signature
Statement of Use
Intended Use
This product is designed for removing material using abra-
sives. No other use permitted.
© Rodcraft - 8956001241
and selecting 'Tools' then 'Legislation'.
If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the machine-
builder. Noise and vibration emission data for the com-
plete machine should be given in the instruction manual
for the machine.
WARNING
This product can expose you to chemicals including lead,
which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more
information go to
https://www.p65warnings.ca.gov/
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below may result
in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the product
cease to be legible or become detached, replace without
delay.
• The product must only be installed, operated and serviced
by qualified personnel in an industrial environment.
Die Grinder
http://www.pneurop.eu/