HOW TO USE
1. Put the fan on a flat and stable surface and plug the Power plug in to the
outlet.
2. Press Power OFF/ON button.
• If unplugged, the operation starts with the previous operation settings.
• The power button of the Remote control can also be used for setting.
3. Select the speed.
• Every time the speed button is pressed, the display switches as below and the
speed changes. The continuous operation mode starts.
• The speed button
of the Remote control can also be used for setting.
Weak wind
01 ( ) → 02 → 03 → ・ ・ ・ → 10 → 11 → 12 ( )
• If the fan is not operated for a certain period of time, the icon and
value in the display will become dimmer.
• Pressing any buttons (other than the power button) during
dimming will stop the dimming. Changing settings such as the
mode will not change this.
Press the power button to turn off the power.
Switch mode.
Set Rhythm mode, Sleep mode or Auto mode .
• Every time the mode button is pressed it will alternate between Rhythm
mode, Sleep mode, Auto mode, or Continuous operation .
Rhythm mode
• Adjust the speed slowly to produce an air flow that imitates natural wind .
• Adjust the speed from 12 stages with the Speed button .
Sleep mode
• Adjust the speed from 12 stages with the Speed button .
• The air flow will be decreased gradually from the set air flow .
• The air flow will stop after 2 hours .
* Setting the Timer OFF can be released . Timer OFF cannot be set .
Auto mode
• The room temperature will be detected automatically and the speed will be
adjusted automatically .
* Every time the Speed button is pressed, the continuous operation will start
with the Speed of Auto mode .
* Adjust the setting again to use Timer OFF .
Strong wind
9
Turn on
Turn on
Turn on
Turn on
Turn on
Turn on